As a production worker, your day consists of hanging and taking down the metal materials, stacking materials, performing treatments... This is physically demanding production work. You are therefore open to performing heavy work. In general, you are responsible for an independent, efficient product/process follow-up towards quality and its reporting by inspection plan galvanizing. You properly carries out procedures and work instructions of the (ISO) management system/standards. You actively reports quality defects safety incidents and order/ cleanliness issues. a) Fastening (hanging) Tying in involves attaching the material to be galvanized or "blacked out" to the gantry. This is done by means of special suspension and tying tools such as steel wire, hooks or chains. You inspect incoming products, attach products in a safe manner, ensure tidiness and cleanliness of workshop, and perform small maintenance. b) Finishing (taking down and polishing) After the pieces have been galvanized and possibly cooled, they are detached. The steel wires with which the pieces were fastened are collected and transported to a scrap dealer. The tying material that is used several times must be dezincified each time. The mechanical operations (sanding, filing e.g. filing away drops of zinc,...) necessary to bring the galvanized material into line with the appearance requirements of the prevailing standard are known as "polishing". You inspect incoming products, remove galvanized products in a safe manner, perform corrections to galvanized products, ensure tidiness and cleanliness of workshop, and perform small maintenance.